INSTALLATION
Removal / installation · Vehicles built from Jul 2007
| 1.
TEMPORARILY TIGHTEN REAR SHOCK ABSORBER |
 |
Install the 3 cushion retainers, the No. 1 cushion, the No. 2 cushion and the shock absorber with a new nut.
- Install the shock absorber with the bolt.
- While holding the piston rod, fully tighten a new nut.
-
Torque:
- 25 N*m{
255 kgf*cm
, 18 ft.*lbf
}
| 2.
INSTALL REAR WHEEL |
 |
-
Torque:
- 112 N*m{
1,137 kgf*cm
, 82 ft.*lbf
}
| 3.
STABILIZE SUSPENSION |
 |
Jack down the vehicle.
Bounce the vehicle up and down several times to stabilize the suspension.
| 4.
FULLY TIGHTEN REAR SHOCK ABSORBER |
 |
Fully tighten the bolt.
-
Torque:
- 98 N*m{
1,000 kgf*cm
, 72 ft.*lbf
}