2011-2016 FJ Cruiser · Service Manual SUSPENSION & AXLE

INSTALLATION

Removal / installation · Vehicles built from Jul 2007


1. TEMPORARILY TIGHTEN REAR UPPER CONTROL ARM

D028138
  1. Install the upper control arm and temporarily tighten the nut, washer and bolt.

  1. D028137
    Install the upper control arm and temporarily tighten the nut, washer and bolt.


2. STABILIZE SUSPENSION
  1. Jack down the vehicle.

  1. Bounce the vehicle up and down several times to stabilize the suspension.


3. FULLY TIGHTEN REAR UPPER CONTROL ARM

D028140E01
  1. Fully tighten the 2 nuts.

    Torque:
    80 N*m{ 816 kgf*cm , 59 ft.*lbf }

    HINT:
    While fixing the bolt, turn and install the nut.

← REMOVAL (from Jul 2007)COMPONENTS (from Jul 2007) →