2011-2016 FJ Cruiser · Service Manual SUSPENSION & AXLE

INSTALLATION

Removal / installation · Vehicles built from Jul 2007


1. TEMPORARILY TIGHTEN REAR LOWER CONTROL ARM

D028251E01
  1. Install the lower control arm, as shown in the illustration.

  1. D028250
    Provisionally tighten the bolt, nut and washer.

  1. C133063
    Provisionally tighten the bolt, nut and washer.


2. INSTALL PARKING BRAKE CABLE

C133062
  1. Install the parking brake cable onto the lower control arm.

    Torque:
    13 N*m{ 127 kgf*cm , 9 ft.*lbf }


3. INSTALL REAR WHEEL

Torque:
112 N*m{ 1,137 kgf*cm , 82 ft.*lbf }


4. STABILIZE SUSPENSION
  1. Jack down the vehicle.

  1. Bounce the vehicle up and down several times to stabilize the suspension.


5. FULLY TIGHTEN REAR LOWER CONTROL ARM

C133064
  1. Fully tighten the 2 bolts.

    Torque:
    130 N*m{ 1,326 kgf*cm , 96 ft.*lbf }

    HINT:
    While fixing the nut, turn and install the bolt.

← REMOVAL (from Jul 2007)INSPECTION (Jul 2007 – Oct 2010) →