INSTALLATION
Removal / installation · Vehicles built from Jul 2007
| 1. TEMPORARILY TIGHTEN REAR LATERAL CONTROL ROD |
![]() ![]() |
Install the lateral control rod and provisionally tighten the bolt.
Provisionally tighten the bolt and nut.

| 2. STABILIZE SUSPENSION |
Jack down the vehicle.
Bounce the vehicle up and down several times to stabilize the suspension.
| 3. FULLY TIGHTEN REAR LATERAL CONTROL ROD |
![]() ![]() |
Fully tighten the 2 bolts.
- Torque:
- 130 N*m{ 1,326 kgf*cm , 96 ft.*lbf }
- HINT:
- While fixing the nut, turn and install the bolt.


