2011-2016 FJ Cruiser · Service Manual SUSPENSION & AXLE

REMOVAL

Removal / installation · Vehicles built from Jul 2007


1. REMOVE REAR WHEEL

2. REMOVE REAR STABILIZER LINK ASSEMBLY

D028258
  1. Remove the nut and separate the stabilizer link.

    HINT:
    If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud.

  1. D028259
    While holding the stabilizer link with a spanner, remove the nut.

  1. Remove the 2 No. 1 retainers, 2 cushions, No. 2 retainer and stabilizer link.

  1. The removal procedure for the RH side is the same as that for the LH side.


3. REMOVE REAR STABILIZER BAR

D028260
  1. Remove the 4 bolts, stabilizer bracket cover and stabilizer bar.


4. REMOVE REAR STABILIZER BUSH
  1. Remove the stabilizer bush from the stabilizer bar.

← COMPONENTS (from Jul 2007)INSPECTION (from Jul 2007) →