REMOVAL
Removal / installation · Vehicles built from Jul 2007
| 1. REMOVE REAR WHEEL |
| 2. DRAIN BRAKE FLUID |
- NOTICE:
- Immediately wash off any brake fluid that comes into contact with any painted surfaces.
| 3. REMOVE REAR FLEXIBLE HOSE |
![]() ![]() |
Remove the union bolt and gasket and separate the flexible hose from the disc brake cylinder.
- HINT:
- Use a container to collect the brake fluid as it drains out.
Using a union nut wrench, separate the brake tube while holding the flexible hose with a wrench.
- HINT:
- Use a container to collect the brake fluid as it drains out.
Remove the clip and flexible hose.
| 4. REMOVE REAR BRAKE TUBE FLEXIBLE HOSE |
![]() ![]() |
Using a union nut wrench, separate the brake tubes while holding the flexible hose with a wrench.
- HINT:
- Use a container to collect the brake fluid as it drains out.
Remove the 2 clips and flexible hose.



