2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from Aug 2012

Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2012 from Aug 2012


1. INSTALL REAR COMBINATION LIGHT ASSEMBLY
  1. Connect the 3 connectors and install the rear combination light.

  1. Install the 3 nuts.

    Torque:
    6.0 N*m{ 61 kgf*cm , 53 in.*lbf }


2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side)
  1. w/ Rear Power Outlet Socket:

    1. Connect the 2 connectors.

  1. Engage the 6 clips and the 8 claws and install the deck trim side panel.

  1. Install the 3 screws.

  1. Install the bolt.

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }


3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side)
  1. Engage the 6 clips and the 8 claws and install the deck trim side panel.

  1. Install the 3 screws.


4. INSTALL REAR SEAT OUTER BELT ASSEMBLY
  1. Install the anchor plate with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

  1. Make sure that the anchor plate rotates smoothly.


5. INSTALL LAP BELT OUTER ANCHOR COVER

HINT:
Use the same procedure for both sides.

  1. Engage the 3 claws and install the lap belt outer anchor cover.


6. INSTALL AMPLIFIER BOX SPEAKER ASSEMBLY (w/ Woofer)
  1. Install the amplifier box speaker with the 4 screws.

    Torque:
    8.1 N*m{ 83 kgf*cm , 72 in.*lbf }

  1. Connect the connectors.


7. INSTALL SPEAKER MOUNTING COVER (w/ Woofer)
  1. Engage the 8 clips and 2 guides and install the speaker mounting cover.


8. INSTALL DECK SIDE GARNISH (w/ Woofer)
  1. Engage the 6 claws and install the deck side garnish.


9. INSTALL QUARTER TRIM POCKET (w/o Woofer)
  1. Engage the 6 claws and install the quarter trim pocket.


10. INSTALL SIDE TRIM COVER (w/o Woofer)
  1. Engage the 6 claws and the 2 guides and install the side trim cover.


11. INSTALL QUARTER TRIM POCKET TRAY (w/o Woofer)
  1. Engage the 7 claws and install the quarter trim pocket tray.


12. INSTALL PACKAGE HOLDER NET HOOK

HINT:
Use the same procedure to install all the package holder net hooks.

  1. Install the package holder net hook with the bolt.

    Torque:
    8.1 N*m{ 83 kgf*cm , 72 in.*lbf }


13. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP

  1. B130604E03
    Align the locating marks with the paint marks first, and install the front door opening trim weatherstrip, as shown in the illustration.
    Text in Illustration 
    *a
    Locating Mark
    *b
    Paint Mark

    Paint mark:
    Area
    Color
    RH side
    White
    LH side
    Red


14. INSTALL REAR DOOR SCUFF PLATE
  1. Engage the 6 claws and install the access door scuff plate.


15. INSTALL FRONT DOOR SCUFF PLATE
  1. Engage the 14 claws and install the door scuff plate.


16. INSTALL REAR FLOOR MAT ASSEMBLY
  1. Install the rear floor mat with the 2 clips.


17. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY

HINT:
Use the same procedure for both sides.

  1. Install the luggage hold belt striker with the bolt.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }

  1. Install the cap.


18. INSTALL REAR FLOOR MAT SUPPORT PLATE
  1. Engage the 11 claws and install the rear floor mat support plate.

  1. Install the 5 screws.


19. INSTALL REAR FLOOR BOARD
  1. Engage the clip and claw and install the rear floor board.

  1. B135074E05
    Install the luggage hold belt striker with the bolt.
    Text in Illustration 
    *1
    Guide
    *a
    for RH Side
    *b
    for LH Side

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }

    HINT:
    Use the same procedure for both sides.


20. INSTALL REAR SEATBACK ASSEMBLY RH (for RH Side)

  1. B130750E01
    Engage the hook and temporarily install the rear seatback with the 2 bolts.

  1. Tighten the 2 bolts in the sequence shown in the illustration.

    Torque:
    37 N*m{ 375 kgf*cm , 27 ft.*lbf }

  1. Pull up the rear seatback.

  1. B135128E01
    Install the rear seat inner belt into the rear seatback holder.

  1. Install the anchor plate of the rear center seat outer belt with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not place the anchor plate over the convex area of the rear seat inner belt.


21. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY RH (for RH Side)

  1. B130749
    Pull the rear seatback lock release button and tilt the rear seatback forward.

  1. Engage the 10 clips and install the rear seatback board carpet.

  1. Pull up the rear seatback.


22. INSTALL REAR SEATBACK ASSEMBLY LH (for LH Side)

  1. B130721E01
    Engage the hook and temporarily install the rear seatback with the 2 bolts.

  1. Tighten the 2 bolts in the sequence shown in the illustration.

    Torque:
    37 N*m{ 375 kgf*cm , 27 ft.*lbf }

  1. Install the rear center seat inner belt into the rear seatback holder.


23. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY LH (for LH Side)

  1. B130720
    Engage the 8 clips and install the rear seatback board carpet.

  1. Pull up the rear seatback.

← INSTALLATION (Nov 2010 – Jul 2012)COMPONENTS (Jul 2007 – Oct 2010) →