REMOVAL
Removal / installation · Vehicles built Jul 2007 – Oct 2010
Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2012 from Aug 2012
- HINT:
- Use the same procedure for both the RH and LH sides, unless otherwise specified.
- The procedure described below is for the LH side.
| 1.
REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY RH
|
 |
- Pull the rear seatback lock release button and tilt the rear seatback forward.
Disengage the 10 clips and remove the rear seatback board carpet.
| 2.
REMOVE REAR SEATBACK ASSEMBLY RH
|
 |
- Pull up the rear seatback.
Remove the bolt and the anchor plate of the rear center seat outer belt.
- Remove the rear seat inner belt from the rear seatback holder.
Pull the rear seatback lock release button and tilt the rear seatback forward.
Remove the 2 bolts.
Disengage the hook and remove the rear seatback.
| 3.
REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY LH
|
 |
- Pull the rear seatback lock release button and tilt the rear seatback forward.
Disengage the 8 clips and remove the rear seatback board carpet.
| 4.
REMOVE REAR SEATBACK ASSEMBLY LH
|
 |
- Remove the rear center seat inner belt from the rear seatback holder.
Remove the 2 bolts.
Disengage the hook and remove the rear seatback.
| 5.
REMOVE REAR FLOOR BOARD
|
 |
- Remove the bolt and the luggage hold belt striker.
- HINT:
- Use the same procedure for both sides.
- Disengage the clip and the claw and remove the rear floor board.
| 6.
REMOVE REAR FLOOR MAT SUPPORT PLATE
|
 |
- Remove the 5 screws.
- Disengage the 11 claws and remove the rear floor mat support plate.
| 7.
REMOVE REAR FLOOR MAT ASSEMBLY
|
 |
- Using a clip remover, remove the 2 clips and the rear floor mat.
| 8.
REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY
|
 |
- HINT:
- Use the same procedure for both sides.
- Remove the cap.
Remove the bolt and the luggage hold belt striker.
| 9.
REMOVE FRONT DOOR SCUFF PLATE RH
|
 |
- Disengage the 14 claws and remove the front door scuff plate.
| 10.
REMOVE FRONT DOOR SCUFF PLATE LH
|
 |
- HINT:
- Use the same procedure as for the RH side.
| 11.
REMOVE REAR DOOR SCUFF PLATE RH
|
 |
- Disengage the 6 claws and remove the access door scuff plate.
| 12.
REMOVE REAR DOOR SCUFF PLATE LH
|
 |
- HINT:
- Use the same procedure as for the RH side.
| 13.
REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH
|
 |
- Remove the front door opening trim weatherstrip.
| 14.
REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH
|
 |
- HINT:
- Use the same procedure as for the RH side.
| 15.
REMOVE DECK SIDE GARNISH (w/ Woofer)
|
 |
- Disengage the 6 claws and remove the rear deck side garnish.
| 16.
REMOVE SPEAKER MOUNTING COVER (w/ Woofer)
|
 |
- Disengage the 8 clips and remove the speaker mounting cover.
| 17.
REMOVE AMPLIFIER BOX SPEAKER ASSEMBLY (w/ Woofer)
|
 |
- Disconnect the speaker connector.
Remove the 4 screws and the amplifier box speaker.
| 18.
REMOVE PACKAGE HOLDER NET HOOK
|
 |
- HINT:
- Use the same procedure to remove all the package holder net hooks.
Remove the screw and the package holder net hook.
| 19.
REMOVE QUARTER TRIM POCKET TRAY (w/o Woofer)
|
 |
- Disengage the 7 claws and remove the quarter trim pocket tray.
| 20.
REMOVE SIDE TRIM COVER (w/o Woofer)
|
 |
- Disengage the 8 claws and remove the side trim cover.
| 21.
REMOVE QUARTER TRIM POCKET (w/o Woofer)
|
 |
- Disengage the 6 claws and remove the quarter trim pocket.
| 22.
REMOVE LAP BELT OUTER ANCHOR COVER
|
 |
- HINT:
- Use the same procedure for both sides.
Disengage the 3 claws and remove the lap belt outer anchor cover.
| 23.
REMOVE REAR SEAT OUTER BELT ASSEMBLY RH
|
 |
- Remove the bolt and the anchor plate.
| 24.
REMOVE REAR SEAT OUTER BELT ASSEMBLY LH
|
 |
- HINT:
- Use the same procedure as for the RH side.
| 25.
REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH
|
 |
- Remove the 4 screws.
- Disengage the 6 clips and the 8 claws and remove the deck trim side panel.
| 26.
REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH
|
 |
- Remove the 3 screws.
- Disengage the 6 clips and the 8 claws and remove the deck trim side panel.
| 27.
REMOVE REAR COMBINATION LIGHT ASSEMBLY |
 |
Remove the 3 nuts.
Disconnect the 3 connectors and remove the rear combination light.