2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

DISASSEMBLY

Removal / installation · Vehicles built from Jul 2007


1. REMOVE REAR COMBINATION LIGHT GASKET

E127202
  1. Remove the rear combination light gasket.

    NOTICE:
    1. Detach the gasket if it adheres to the body.
    2. Do not reuse a removed gasket. Replace it with a new one to prevent water from entering.


2. REMOVE TAIL AND STOP LIGHT BULB

E127203
  1. Turn the rear combination light socket and bulb, in the direction indicated by the arrow in the illustration, to remove them.

  1. Remove the rear combination light bulb from the light socket.


3. REMOVE BACK UP LIGHT BULB

E127205
  1. Turn the rear combination light socket and bulb, in the direction indicated by the arrow in the illustration, to remove them.

  1. Remove the rear combination light bulb from the light socket.


4. REMOVE REAR TURN SIGNAL LIGHT BULB

E127207
  1. Turn the rear combination light socket and bulb, in the direction indicated by the arrow in the illustration, to remove them.

  1. Remove the rear combination light bulb from the light socket.

← REMOVAL (from Aug 2012)REASSEMBLY (from Jul 2007) →