2011-2016 FJ Cruiser · Service Manual BRAKE

DISASSEMBLY

Removal / installation · Vehicles built from Jul 2007


1. REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING

D028127
  1. Using needle-nose pliers, remove the 2 return tension springs.


2. REMOVE PARKING BRAKE SHOE STRUT
  1. Remove the parking brake shoe strut and compression spring.


3. REMOVE PARKING BRAKE SHOE

D028128
  1. Remove the 2 hold down spring cups, hold down compression spring and hold down spring pin.

  1. Disconnect the return tension spring and remove the No. 2 shoe.

  1. Remove the shoe adjusting screw set and return tension spring.

  1. Remove the 2 hold down spring cups, hold down compression spring and hold down spring pin.

  1. Using needle-nose pliers, disconnect the parking brake cable and remove the No. 1 shoe.


4. REMOVE PARKING BRAKE SHOE LEVER

D028129
  1. Using a screwdriver, remove the C-washer.

  1. Remove the shim and parking brake shoe lever from the No. 1 shoe.

← REMOVAL (from Jul 2007)INSPECTION (from Jul 2007) →