2011-2016 FJ Cruiser · Service Manual BRAKE

INSTALLATION

Removal / installation · Vehicles built Jul 2007 – Oct 2010

Versions by build date: Jul 2007 – Oct 2010 from Nov 2010


1. INSTALL PARKING BRAKE SWITCH

C133100
  1. Install the parking brake switch with the screw.

  1. Connect the parking brake switch connector.


2. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY

  1. B133897
    Engage the 3 claws and 5 clips and install the console upper rear panel.


3. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

  1. B133896
    Install the shift lever knob.


4. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)

  1. B133894
    Install the shift lever knob.


5. INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY

B133901E01
  1. Slide the parking brake hole cover toward the rear of the vehicle and engage the 2 C claws.

  1. Engage the 4 claws and install the parking brake hole cover.


6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }

← INSPECTION (from Jul 2007)INSTALLATION (from Nov 2010) →