REMOVAL
Removal / installation · Vehicles built Jul 2007 – Oct 2010
Versions by build date: Jul 2007 – Oct 2010 from Nov 2010
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
|
| 2.
REMOVE INSTRUMENT PANEL GARNISH LH
|
 |
- Remove screw <H>.
Disengage the 3 clips and remove the instrument panel garnish.
- NOTICE:
- Pull the instrument panel garnish up at an angle of 45° to remove it.
- Do not damage the surface of the instrument panel when removing it.
| 3.
REMOVE INSTRUMENT PANEL GARNISH RH
|
 |
- Remove screw <H>.
Disengage the 3 clips and remove the instrument panel garnish.
- NOTICE:
- Pull the instrument panel garnish up at an angle of 45° to remove it.
- Do not damage the surface of the instrument panel when removing it.
| 4.
REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY |
 |
Remove the 2 screws.
Disengage the 4 clips and remove the integration control and panel.