2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

INSPECTION

Inspection · Vehicles built from Jul 2007


INSPECT CLEARANCE WARNING BUZZER

  1. B138426E01
    Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Tester Connection
      Specified Condition
      1 - 2
      Approximately 1 kΩ

      If the result is not as specified, replace the clearance warning buzzer.

← REMOVAL (from Nov 2010)INSTALLATION (Jul 2007 – Oct 2010) →