REMOVAL
Removal / installation · Vehicles built Jul 2007 – Oct 2010
Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Oct 2012 from Nov 2012
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
|
| 2.
REMOVE REAR BUMPER COVER
|
 |
- Apply protective tape as shown in the illustration.
- Remove the 7 bolts and the 2 screws.
- w/ Back Sonar:
Disconnect the 2 wire to wire connectors.
- Disengage the 6 claws and the 2 clips and remove the rear bumper cover.
| 3.
REMOVE ULTRASONIC SENSOR |
 |
- Disconnect the ultrasonic sensor connector.
Remove the retainer and the ultrasonic sensor as shown in the illustration.