INSTALLATION
Removal / installation · Vehicles built from Nov 2010
Versions by build date: Jul 2007 – Oct 2010 from Nov 2010
| 1.
INSTALL STEREO JACK ADAPTER ASSEMBLY |
 |
- Engage the 2 claws and install the stereo jack adapter.
| 2.
INSTALL INSTRUMENT LOWER COVER SUB-ASSEMBLY
|
 |
Engage the 3 clips and 2 claws and install the instrument lower cover.
Install the 2 <E> bolts and 2 clips.
| 3.
INSTALL FRONT CONSOLE BOX
|
 |
Engage the 5 guides and install the front console box.
Install the 4 <H> bolts.
| 4.
INSTALL FRONT CONSOLE BOX BOTTOM MAT
|
 |
Install the box bottom mat.
| 5.
INSTALL FRONT CONSOLE BOX UPPER PANEL SUB-ASSEMBLY
|
 |
Engage the 3 guides and 5 clips and install the console upper rear panel.
| 6.
INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY
|
 |
- Slide the parking brake hole cover toward the rear of the vehicle and engage the 2 guides.
Engage the 4 claws and install the parking brake hole cover.
| 7.
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD)
|
 |
- Install the shift lever knob.
| 8.
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)
|
 |
- Install the shift lever knob.
| 9.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
 |
-
Torque:
- 3.9 N*m{
40 kgf*cm
, 35 in.*lbf
}