2011-2016 FJ Cruiser · Service Manual RESTRAINTS

INSPECTION

Inspection · Vehicles built Jul 2007 – Oct 2010


INSPECT FRONT SEAT OUTER BELT ASSEMBLY (for Driver Side)

  1. B135158E01
    Check the operation.

    NOTICE:
    Do not apply battery voltage to the pretensioner connector.


    1. Connect the positive battery lead to terminal 1 of the tension reducer connector and the negative battery lead to terminal 2.

    2. Check that an operating sound is heard when the magnetized solenoid attracts the plunger.

    3. Pull out the seat belt and allow it to retract. Listen to the operating sound.

    4. Pull out the seat belt again, disconnect the negative battery lead and allow the seat belt to retract. Listen to the operating sound again and check that the operating sound volume has increased.
      If the result is not as specified, replace the front seat outer belt.

← REMOVAL (from Aug 2012)INSTALLATION (Jul 2007 – Oct 2010) →