TORQUE SPECIFICATIONS
Specifications · Vehicles built Jul 2007 – Jul 2009
Versions by build date: Jul 2007 – Jul 2009 from Aug 2009
| Part Tightened |
N*m |
kgf*cm |
ft.*lbf |
| Generator assembly x V-ribbed belt tensioner and cylinder head |
43 |
438 |
32 |
| Generator assembly x Wire harness clamp bracket |
8.0 |
82 |
71 in.*lbf |
| Generator assembly x Terminal B |
10 |
100 |
7 |
| Wire harness stay x Body |
5.8 |
59 |
51 in.*lbf |
| V-bank cover x Intake air surge tank sub-assembly and Air cleaner assembly |
7.5 |
76 |
66 in.*lbf |
| Engine under cover sub-assembly No. 1 x Frame assembly |
29 |
296 |
21 |
| Retainer plate x Drive end frame assembly generator (for 100 A Type) |
26 |
27 |
23 in.*lbf |
| Generator coil assembly x Drive frame assembly generator (for 100 A Type) |
5.8 |
59 |
51 in.*lbf |
| Generator brush holder assembly x Generator coil assembly (for 100 A Type) |
1.8 |
18 |
16 in.*lbf |
| Generator rear end cover x Generator coil assembly (for 100 A Type) |
4.5 |
46 |
40 in.*lbf |
| Generator rectifier and frame x Generator drive frame assembly (for 80 A Type) |
4.5 |
46 |
40 in.*lbf |
| Generator holder with rectifier x Generator rectifier end frame (for 80 A Type) |
2.0 |
20 |
18 in.*lbf |
| Generator voltage regulator assembly x Generator holder with rectifier (for 80 A Type) |
2.0 |
20 |
18 in.*lbf |
| Generator brush holder assembly x Generator rectifier end frame (for 80 A Type) |
2.0 |
20 |
18 in.*lbf |
| Generator rear end cover x Generator rectifier end frame (for 80 A Type) |
4.4 |
45 |
39 in.*lbf |
| Plate terminal x Generator rear end cover (for 80 A Type) |
3.9 |
40 |
34 in.*lbf |
| Generator pulley x Generator rotor assembly |
133 |
1356 |
98 |