2011-2016 FJ Cruiser · Service Manual SERVICE SPECIFICATIONS

SERVICE DATA

Specifications · Vehicles built Aug 2009 – Oct 2010

Versions by build date: Jul 2007 – Jul 2009 Aug 2009 – Oct 2010 from Nov 2010

Power steering fluid
Fluid level rise
Maximum
5 mm (0.20 in.)
Fluid pressure at idle speed with valve closed
8.3 MPA Type
8300 to 9000 kPa (85 to 92 kgf/cm2, 1203 to 1305 psi)
Fluid pressure at idle speed with valve closed
10.0 MPA Type
10000 to 10700 kPa (102 to 109 kgf/cm2, 1450 to 1552 psi)
Fluid pressure at idle speed with valve fully open and turn the steering wheel to the full lock position
8.3 MPA Type
8300 to 9000 kPa (85 to 92 kgf/cm2, 1203 to 1305 psi)
Fluid pressure at idle speed with valve fully open and turn the steering wheel to the full lock position
10.0 MPA Type
8300 to 8800 kPa (85 to 90 kgf/cm2, 1203 to 1276 psi)
Fluid pressure at idle speeds of 1000 rpm and 3000 rpm

490 kPa (5 kgf/cm2, 71 psi) or less
Steering wheel
Steering effort at idle speed
Reference
6.0 N*m (60 kgf*cm, 53in.*lbf)
Power steering vane pump
Vane pump rotating torque
0.27 N*m (2.8 kgf*cm, 2.4 in.*lbf) or less
Vane plate height
Minimum
7.6 mm (0.299 in.)
Vane plate thickness
Minimum
1.405 mm (0.0553 in.)
Vane plate length
Minimum
11.993 mm (0.4722 in.)
Clearance between the rotor groove and plate
Maximum
0.025 mm (0.0010 in.)
Spring free length
Minimum
29.2 mm (1.150 in.)
Oil seal clearance
Standard clearance
0.021 to 0.043 mm (0.0008 to 0.0017 in.)
Oil seal clearance
Maximum
0.07 mm (0.0028 in.)
Power steering linK
Total preload (tie rod rotating torque)
Turning
0.29 to 1.96 N*m (2.9 to 20.0 kgf*cm, 2.57 to 17.35 in.*lbf)
Total preload (control valve rotating torque)
Turning
0.8 to 1.6 N*m (8.2 to 16.3 kgf*cm, 7.1to 14.2 in.*lbf)
← SERVICE DATA (Jul 2007 – Jul 2009)SERVICE DATA (from Nov 2010) →