DISPOSAL
Removal / installation · Vehicles built from Aug 2013
| 1. DISPOSE OF FRONT SUSPENSION MEMBER DAMPER ASSEMBLY |
Using a drill or similar tool, make a hole in the cylinder between A and B shown in the illustration to discharge the gas inside.

- A to B:
- 30 mm (1.18 in.)
- CAUTION:
- Always use proper safety equipment and be careful when drilling because shards of metal may fly about.
- NOTICE:
- Since the discharging gas may cause chips to scatter, cover the drill or similar tool with a piece of cloth when making the hole.
- The gas is colorless, odorless and non-poisonous.
- Since the discharging gas may cause chips to scatter, cover the drill or similar tool with a piece of cloth when making the hole.
