2011-2016 FJ Cruiser · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Aug 2009

CAUTION:
  1. Wear protective gloves when removing the sensor.
  2. The exhaust pipe assembly is extremely hot immediately after the engine has stopped.
  3. Confirm that the exhaust pipe assembly has cooled down before removing it.


1. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)
  1. Disconnect the sensor connector.

  1. A229665E01
    Using SST, remove the sensor.
    SST
    09224-00010  


2. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)
  1. Disconnect the sensor connector.

  1. A223689E02
    Using SST, remove the sensor.
    SST
    09224-00010  

← COMPONENTS (from Aug 2009)INSPECTION (from Aug 2009) →