2011-2016 FJ Cruiser · Service Manual ENGINE

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Aug 2009


INSPECT POWER STEERING OIL PRESSURE SWITCH
  1. Check the oil pressure switch.

    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the intelligent tester on.

    4. Enter the following menus: Powertrain / Engine and ECT / Data List / Power Steering Signal.

    5. Start the engine.

    6. Operate the steering wheel while idling, and read the value on the intelligent tester.

      OK:
      Condition
      Specified Condition
      Power steering operation
      ON
      Power steering not operation
      OFF

      If the result is not as specified, replace the oil pressure switch.

← COMPONENTS (from Aug 2009)REMOVAL (from Aug 2009) →