2011-2016 FJ Cruiser · Service Manual BRAKE

INSPECTION

Inspection · Vehicles built from Aug 2012


INSPECT CRAWL CONTROL SWITCH ASSEMBLY

C266314E01
Text in Illustration 
*1
CRAWL ON/OFF Switch
*2
CRAWL Speed Selector Switch
*a
Component without harness connected
(Crawl Control Switch Assembly)
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    5 (SWI1) - 6 (SWO2)
    Speed selector switch:
    Low
    1379 to 2561 Ω
    Speed selector switch:
    Medium-low
    1071 to 1989 Ω
    Speed selector switch:
    Medium
    700 to 1300 Ω
    Speed selector switch:
    Medium-high
    329 to 611 Ω
    Speed selector switch:
    High
    21 to 39 Ω
    6 (SWO2) - 8 (SWO4)
    Speed selector switch:
    Low
    21 to 39 Ω
    Speed selector switch:
    Medium-low
    329 to 611 Ω
    Speed selector switch:
    Medium
    700 to 1300 Ω
    Speed selector switch:
    Medium-high
    1071 to 1989 Ω
    Speed selector switch:
    High
    1379 to 2561 Ω
    2 (SWI3) - 8 (SWO4)
    ON/OFF switch:
    Pressed
    Below 1 Ω
    ON/OFF switch:
    Not pressed
    10 kΩ or higher

    If the result is not as specified, replace the crawl control switch assembly.

← REMOVAL (from Aug 2012)INSTALLATION (from Aug 2012) →