2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from Jul 2007


1. INSTALL REAR FOG LIGHT ASSEMBLY LH

E161251
  1. Install the rear fog light with the 2 screws.

  1. Connect the 2 connectors and wire harness clamp.


2. INSTALL REAR FOG LIGHT ASSEMBLY RH

E161252
  1. Install the rear fog light with the 2 screws.

  1. Connect the 2 connectors and wire harness clamp.


3. INSTALL REAR BUMPER SIDE RETAINER RH

E161885
  1. Install the rear bumper extension retainer with the 3 screws.


4. INSTALL REAR BUMPER SIDE RETAINER LH

HINT:
Use the same procedure as for the RH side.


5. INSTALL REAR BUMPER COVER

  1. B190460
    Engage the 6 claws and the 2 clips and install the rear bumper cover.

  1. B198721
    Engage the harness clamp, and connect the connector.

  1. B135141
    Tighten the 7 bolts and the 2 screws.

    Torque:
    8.0 N*m{ 80 kgf*cm , 71 in.*lbf } for bolt
    3.0 N*m{ 30 kgf*cm , 27 in.*lbf } for screw

  1. B198720
    Install the clip.

    HINT:
    Use the same procedure for the RH side and LH side.

  1. B190458
    Remove the protective tape.

← REASSEMBLY (from Jul 2007)COMPONENTS (from Aug 2012) →