2011-2016 FJ Cruiser · Service Manual BRAKE

INSTALLATION

Removal / installation · Vehicles built Nov 2010 – Jul 2012

Versions by build date: Aug 2008 – Oct 2010 Nov 2010 – Jul 2012 from Aug 2012


1. INSTALL VSC OFF SWITCH
  1. Attach the 2 claws to install the VSC off switch.

  1. Connect the VSC off switch connector.


2. INSTALL INSTRUMENT LOWER COVER SUB-ASSEMBLY
  1. Engage the 3 clips and 2 claws and install the instrument lower cover.

  1. Install the 2 <E> bolts and 2 clips.


3. INSTALL CONSOLE UPPER PANEL NO. 1 GARNISH (for RHD)

  1. B267085
    Slide the console upper panel garnish toward the front of the vehicle and engage guide.

  1. Engage the claw and 2 clips and install the console upper panel garnish.


4. INSTALL FRONT CONSOLE BOX
  1. Engage the 5 guides and install the front console box.

  1. Install the 4 <H> bolts.


5. INSTALL BOX BOTTOM MAT
  1. Install the box bottom mat.


6. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY
  1. Engage the 3 guides and 5 clips and install the console upper rear panel.


7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD)

  1. B133896
    Install the shift lever knob.


8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)

  1. B133894
    Install the shift lever knob.


9. INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY

  1. B271483
    Slide the parking brake hole cover toward the rear of the vehicle and engage the 2 guides.

  1. Engage the 4 claws and install the parking brake hole cover.

← INSTALLATION (Aug 2008 – Oct 2010)INSTALLATION (from Aug 2012) →