2011-2016 FJ Cruiser · Service Manual BRAKE

REMOVAL

Removal / installation · Vehicles built Nov 2010 – Jul 2012

Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2012 from Aug 2012


1. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY

  1. B271473
    Disengage the 4 claws.

  1. Slide the parking brake hole cover toward the front of the vehicle, disengage the 2 guides and remove the parking brake hole cover.


2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)

  1. B133893
    Remove the shift lever knob.


3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD)

  1. B133895
    Remove the shift lever knob.


4. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY

  1. B271474
    Shift the shift lever into the N position.

  1. Disengage the 5 clips and 3 guides and remove the console upper rear panel.


5. REMOVE BOX BOTTOM MAT

  1. B133899
    Remove the box bottom mat.


6. REMOVE FRONT CONSOLE BOX

  1. B271475
    Remove the 4 <H> bolts.

  1. Disengage the 5 guides and remove the console box.


7. REMOVE CONSOLE UPPER PANEL NO. 1 GARNISH (for RHD)

  1. B271476
    Disengage claw and the clip.

  1. Slide the console upper panel garnish toward the rear of the vehicle, disengage the guide and remove the console upper panel garnish.


8. REMOVE INSTRUMENT LOWER COVER SUB-ASSEMBLY

  1. B133852
    Remove the 2 clips and 2 <E> bolts.

  1. Disengage the 3 clips and 2 claws and remove the instrument lower cover.


9. REMOVE NO. 2 TRACTION CONTROL SWITCH (A-TRAC SWITCH)

  1. C234005
    Disengage the 2 claws and remove the No. 2 traction control switch (A-TRAC switch).

← REMOVAL (Jul 2007 – Oct 2010)REMOVAL (from Aug 2012) →