REMOVAL
Removal / installation · Vehicles built from Aug 2012
| 1. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY |
Disengage the 4 claws.

Slide the parking brake hole cover toward the front of the vehicle, disengage the 2 guides and remove the parking brake hole cover.
| 2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) |
Remove the shift lever knob.

| 3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD) |
Remove the shift lever knob.

| 4. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY |
Shift the shift lever into the N position.

Disengage the 5 clips and 3 guides and remove the console upper rear panel.
| 5. REMOVE BOX BOTTOM MAT |
Remove the box bottom mat.

| 6. REMOVE FRONT CONSOLE BOX |
Remove the 4 <H> bolts.

Disengage the 5 guides and remove the console box.
| 7. REMOVE CONSOLE UPPER PANEL NO. 1 GARNISH (for RHD) |
Disengage claw and the clip.

Slide the console upper panel garnish toward the rear of the vehicle, disengage the guide and remove the console upper panel garnish.
| 8. REMOVE INSTRUMENT LOWER COVER SUB-ASSEMBLY |
Remove the 2 clips and 2 <E> bolts.

Disengage the 3 clips and 2 claws and remove the instrument lower cover.
| 9. REMOVE DIFFERENTIAL LOCK SWITCH |
Disengage the 2 claws and remove the differential lock switch from the instrument lower cover sub-assembly.

