REMOVAL
Removal / installation · Vehicles built from Aug 2012
Versions by build date: Aug 2008 – Oct 2010 Nov 2010 – Jul 2012 from Aug 2012
| 1.
REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY
|
 |
- Disengage the 4 claws.
Slide the parking brake hole cover toward the front of the vehicle, disengage the 2 guides and remove the parking brake hole cover.
| 2.
REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)
|
 |
- Remove the shift lever knob.
| 3.
REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD)
|
 |
- Remove the shift lever knob.
| 4.
REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY
|
 |
- Shift the shift lever into the N position.
Disengage the 5 clips and 3 guides and remove the console upper rear panel.
| 5.
REMOVE BOX BOTTOM MAT
|
 |
- Remove the box bottom mat.
| 6.
REMOVE FRONT CONSOLE BOX
|
 |
- Remove the 4 <H> bolts.
Disengage the 5 guides and remove the console box.
| 7.
REMOVE CONSOLE UPPER PANEL NO. 1 GARNISH (for RHD)
|
 |
- Disengage claw and the 2 clips.
Slide the console upper panel garnish toward the rear of the vehicle, disengage the guide and remove the console upper panel garnish.
| 8.
REMOVE INSTRUMENT LOWER COVER SUB-ASSEMBLY
|
 |
- Remove the 2 clips and 2 <E> bolts.
Disengage the 3 clips and 2 claws and remove the instrument lower cover.
| 9.
REMOVE VSC OFF SWITCH |
 |
Disconnect the VSC off switch connector.
- Disengage the 2 claws and remove the VSC off switch.