2011-2016 FJ Cruiser · Service Manual DRIVE LINE

INSPECTION

Inspection · Vehicles built from Aug 2012


INSPECT DIFFERENTIAL LOCK SWITCH

  1. C172874E07
    Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *a
    Component without harness connected
    (Differential Lock Switch)

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 (E) - 4 (B)
    Pressed
    Below 1 Ω
    Not pressed
    10 kΩ or higher

    If the result is not as specified, replace the differential lock switch.

← REMOVAL (from Aug 2012)INSTALLATION (from Aug 2012) →