2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built Nov 2010 – Jul 2012

Versions by build date: Nov 2010 – Jul 2012 from Aug 2012


1. INSTALL MULTI-MEDIA INTERFACE ECU ASSEMBLY
  1. Install the multi-media interface ECU with the 2 nuts.

    Torque:
    12 N*m{ 122 kgf*cm , 9 ft.*lbf }

  1. Connect the connectors and clamp.


2. INSTALL RADIO RECEIVER ASSEMBLY (w/ Radio Receiver)

  1. B138605
    Connect the connectors.

  1. Align the 2 bosses of the radio bracket with the hole in the instrument panel and install the radio receiver with the 4 bolts.

    Torque:
    2.5 N*m{ 25 kgf*cm , 22 in.*lbf }


3. INSTALL RADIO TUNER OPENING COVER (w/o Radio Receiver)

  1. B267086
    Align the 2 bosses of the radio bracket with the hole in the instrument panel and install the radio tuner opening cover with the 4 bolts.

    Torque:
    2.5 N*m{ 25 kgf*cm , 22 in.*lbf }


4. INSTALL INTEGRATION CONTROL PANEL ASSEMBLY
  1. Connect the 3 connectors.

  1. Engage the 4 clips and install the integration control panel assembly.

  1. Install the 2 screws.


5. INSTALL INSTRUMENT PANEL GARNISH RH
  1. Engage the 3 clips and install the instrument panel garnish.

  1. Install the screw <G>.


6. INSTALL INSTRUMENT PANEL GARNISH LH
  1. Engage the 3 clips and install the instrument panel garnish.

  1. Install the screw <G>.

← REASSEMBLY (from Nov 2010)INSTALLATION (from Aug 2012) →