REMOVAL
Removal / installation · Vehicles built from Aug 2012
| 1. REMOVE INSTRUMENT PANEL GARNISH LH |
Remove screw <G>.

Disengage the 3 clips and remove the instrument panel garnish.
- NOTICE:
- Pull the instrument panel garnish up at an angle of 45° to remove it.
- Do not damage the surface of the instrument panel when removing it.
- Pull the instrument panel garnish up at an angle of 45° to remove it.
| 2. REMOVE INSTRUMENT PANEL GARNISH RH |
Remove screw <G>.

Disengage the 3 clips and remove the instrument panel garnish.
- NOTICE:
- Pull the instrument panel garnish up at an angle of 45° to remove it.
- Do not damage the surface of the instrument panel when removing it.
- Pull the instrument panel garnish up at an angle of 45° to remove it.
| 3. REMOVE INTEGRATION CONTROL PANEL ASSEMBLY |
Remove the 2 screws.

Disengage the 4 clips and remove the integration control panel assembly.
Disconnect the 3 connectors.
| 4. REMOVE RADIO TUNER OPENING COVER (w/o Radio Receiver) |
Remove the 4 bolts and the radio tuner opening cover.

| 5. REMOVE RADIO RECEIVER ASSEMBLY (w/ Radio Receiver) |
Remove the 4 bolts.

Disconnect the connectors and remove the radio receiver.
| 6. REMOVE DRIVING SUPPORT SWITCH CONTROL ECU (w/o USB Audio System) |
![]() ![]() |
Disconnect the connector.
Remove the nut and the driving support switch control ECU.
| 7. REMOVE DRIVING SUPPORT SWITCH CONTROL ECU (w/ USB Audio System) |
![]() ![]() |
Disconnect the clamp and 3 connectors.
Remove the 2 nuts and the multi-media interface ECU assembly.
Remove the nut and the driving support switch control ECU.



