2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation · Vehicles built from Aug 2012

Versions by build date: Nov 2010 – Jul 2012 from Aug 2012


1. REMOVE INSTRUMENT PANEL GARNISH RH

  1. B133887
    Remove screw <G>.

  1. Disengage the 3 clips and remove the instrument panel garnish.

    NOTICE:
    1. Pull the instrument panel garnish up at an angle of 45° to remove it.
    2. Do not damage the surface of the instrument panel when removing it.


2. REMOVE INSTRUMENT PANEL GARNISH LH

  1. B133886
    Remove screw <G>.

  1. Disengage the 3 clips and remove the instrument panel garnish.

    NOTICE:
    1. Pull the instrument panel garnish up at an angle of 45° to remove it.
    2. Do not damage the surface of the instrument panel when removing it.


3. REMOVE INTEGRATION CONTROL PANEL ASSEMBLY

  1. B133888
    Remove the 2 screws.

  1. Disengage the 4 clips and remove the integration control panel assembly.

  1. Disconnect the 3 connectors.


4. REMOVE RADIO RECEIVER ASSEMBLY (w/ Radio Receiver)

  1. B130575
    Remove the 4 bolts.

  1. Disconnect the connectors and remove the radio receiver.


5. REMOVE RADIO TUNER OPENING COVER (w/o Radio Receiver)

  1. B267052
    Remove the 4 bolts and the radio tuner opening cover.


6. REMOVE MULTI-MEDIA INTERFACE ECU ASSEMBLY

  1. E220892
    Disconnect the clamp and connectors.

  1. Remove the 2 nuts and remove the multi-media interface ECU.

  1. w/ CRAWL:

    1. Disconnect the connector.


7. REMOVE DRIVING SUPPORT SWITCH CONTROL ECU (w/ CRAWL)

C266322
  1. Disconnect the clamp and 3 connectors.

  1. Remove the 2 nuts and the multi-media interface ECU assembly.

  1. C266323
    Remove the nut and the driving support switch control ECU.

← REMOVAL (Nov 2010 – Jul 2012)DISASSEMBLY (from Nov 2010) →