DISASSEMBLY
Removal / installation · Vehicles built from Aug 2012
| 1. REMOVE PERSONAL LIGHT BULB |
Turn the 2 personal light bulb sockets in the direction indicated by the arrows in the illustration to remove them.

Remove the 2 personal light bulbs from the 2 personal light bulb sockets.
| 2. REMOVE NO. 2 ROOF WIRE |
Disconnect the connectors.

Text in Illustration *1
Clamp
*2
Guide
Disengage the 3 guides and clamp to remove the No. 2 roof wire.
| 3. REMOVE CRAWL CONTROL SWITCH ASSEMBLY |
Remove the 6 screws from the face plate sub-assembly.

Disengage the 4 claws and 2 guides to remove the bulb housing sub-assembly from the face plate sub-assembly.

Remove the 4 screws and the crawl control switch assembly from the face plate sub-assembly.

| 4. REMOVE SPARE SWITCH HOLE COVER |
Disengage the 2 claws to remove the spare switch hole cover.

| 5. REMOVE TRANSFER POSITION SWITCH (A-TRAC SWITCH) |
Disengage the 2 claws to remove the transfer position switch (A-TRAC switch).

| 6. REMOVE REAR DIFFERENTIAL LOCK SWITCH |
Disengage the 2 claws to remove the rear differential lock switch.

