2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

REASSEMBLY

Removal / installation · Vehicles built from Aug 2012


1. INSTALL REAR DIFFERENTIAL LOCK SWITCH

  1. C270982
    Engage the 2 claws to install the rear differential lock switch.


2. INSTALL TRANSFER POSITION SWITCH (A-TRAC SWITCH)

  1. C266307
    Engage the 2 claws to install the transfer position switch (A-TRAC switch).


3. INSTALL SPARE SWITCH HOLE COVER

  1. E260476
    Engage the 2 claws to install the spare switch hole cover.


4. INSTALL CRAWL CONTROL SWITCH ASSEMBLY

  1. C266313
    Install the crawl control switch assembly to the face plate sub-assembly with the 4 screws.

  1. E260481
    Connect the 4 claws and 2 guides to install the bulb housing sub-assembly to the face plate sub-assembly.

  1. E260480
    Install the 6 screws to the face plate sub-assembly.


5. INSTALL NO. 2 ROOF WIRE

  1. E260475E01
    Engage the 3 guides and clamp to install the No. 2 roof wire.
    Text in Illustration 
    *1
    Clamp
    *2
    Guide

  1. Connect the connectors.


6. INSTALL PERSONAL LIGHT BULB

  1. E260477
    Install the 2 personal light bulbs into the 2 personal light bulb sockets.

  1. Turn the 2 personal light bulb sockets with the 2 bulbs in the direction indicated by the arrows in the illustration to install them as a unit.

← INSPECTION (from Aug 2012)INSTALLATION (from Aug 2012) →