2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation · Vehicles built from Aug 2014

HINT:
  1. Use the same procedure for both the LH and RH sides.
  2. The procedure described below is for the LH side.


1. REMOVE RADIATOR GRILLE

  1. B134729
    Using a clip remover, remove the 2 clips.

  1. Remove the 2 screws.

  1. Disengage the 5 clips and remove the radiator grille.


2. REMOVE FRONT BUMPER ASSEMBLY

  1. B134730E02
    Apply protective tape as shown in the illustration.
    Text in Illustration 
    *a
    Protective Tape

  1. B138606
    Using a clip remover, remove the 5 clips.

  1. B134731
    Remove the 8 screws and 4 bolts.

  1. w/o Fog Light:

    1. B134733
      Disengage the 2 claws to remove the front bumper assembly.

  1. w/ Fog Light:

    1. Disengage the 2 claws and separate the front bumper assembly.

    2. Disconnect the connector to remove the front bumper assembly.

  1. B138601
    Remove the 4 clips.


3. REMOVE FRONT BUMPER PAD

  1. B387231
    Remove the 6 retainers.

  1. Disengage the 4 claws and remove the front bumper pad LH.


4. REMOVE FRONT BUMPER HOLE COVER

  1. B377694
    Remove the screw.

  1. B380475
    Disengage the 3 claws and guide to remove the front bumper hole cover LH.


5. REMOVE FOG LIGHT ASSEMBLY

  1. B370391
    Remove the 2 screws.

  1. B370374
    Disengage the 2 guides to remove the fog light assembly with front bumper side retainer.

  1. B381717
    Remove the 2 screws and fog light assembly.

← COMPONENTS (from Aug 2014)DISASSEMBLY (from Aug 2014) →