AIR CONDITIONING UNIT > DISASSEMBLY |
| 1. REMOVE MODE CONTROL SERVO MOTOR |
![]() |
Remove the 3 screws and remove the mode control servo motor.
| 2. REMOVE AIR MIX CONTROL SERVO MOTOR |
![]() |
Remove the 3 screws and remove the air mix control servo motor.
| 3. REMOVE COOLER UNIT DRAIN HOSE |
![]() |
Remove the cooler unit drain hose.
| 4. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY |
![]() |
Remove the screw and clamp.
Remove the heater radiator unit from the heater case.
| 5. REMOVE COVER PLATE |
![]() |
Remove the screw.
Disengage the claw and remove the cover plate.
| 6. REMOVE AIR CONDITIONING TUBE ASSEMBLY |
![]() |
Using a hexagon wrench 4, remove the 2 hexagon bolts and remove the air conditioning tube.
Remove the 2 O-rings from the air conditioning tube.
| 7. REMOVE COOLER EXPANSION VALVE |
![]() |
Remove the cooler expansion valve from the cooler evaporator.
| 8. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY |
![]() |
Remove the 2 screws and remove the plate.
![]() |
Remove the 8 screws and separate the heater case.
![]() |
Remove the cooler evaporator.
Remove the 2 O-rings from the cooler evaporator.
| 9. REMOVE NO. 1 COOLER THERMISTOR |
![]() |
Remove the cooler thermistor from the cooler evaporator.