REAR BRAKE > REMOVAL |
| 1. REMOVE REAR WHEEL |
| 2. DRAIN BRAKE FLUID |
| 3. SEPARATE REAR FLEXIBLE HOSE |
![]() |
Remove the union bolt and gasket and separate the flexible hose from the disc brake cylinder.
| 4. REMOVE REAR DISC BRAKE CYLINDER ASSEMBLY |
![]() |
Remove the 2 slide pins and remove the disc brake cylinder from the disc brake cylinder mounting.
| 5. REMOVE REAR DISC BRAKE PAD |
Remove the 2 disc brake pads with anti squeal shim from the disc brake cylinder mounting.
| 6. REMOVE REAR DISC BRAKE ANTI SQUEAL SHIM |
Remove the 2 anti squeal shims from each brake pad.
| 7. REMOVE REAR DISC BRAKE PAD WEAR INDICATOR PLATE |
Remove the indicator plate from the inner side of the brake pad.
| 8. REMOVE REAR DISC BRAKE PAD SUPPORT PLATE |
Remove the 4 pad support plates from the disc brake cylinder mounting.
| 9. REMOVE REAR DISC BRAKE CYLINDER MOUNTING |
![]() |
Remove the 2 bolts and disc brake cylinder mounting.
| 10. REMOVE REAR DISC BRAKE CYLINDER SLIDE BUSH |
Remove the slide bush from the disc brake cylinder mounting.
| 11. REMOVE REAR DISC BRAKE BUSH DUST BOOT |
Remove the dust boot from the disc brake cylinder mounting.
| 12. REMOVE REAR DISC BRAKE CYLINDER HOLE PLUG |
Remove the hole plug from the disc brake cylinder mounting.
| 13. REMOVE REAR DISC |
Place matchmarks on the disc and axle hub and remove the disc.