Home › CRUISE CONTROL SYSTEM › CRUISE CONTROL › CRUISE CONTROL SYSTEM

CRUISE CONTROL SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



DTC CHECK
  1. Connect a Techstream to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the tester ON.

  4. Enter the following menus: Powertrain / Cruise Control / Trouble Codes.

  5. Read the DTCs.


CLEAR DTC
  1. Connect a Techstream to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the tester ON.

  4. Enter the following menus: Select: Powertrain / Cruise Control / Trouble Codes.

  5. Erase the DTCs.