STEERING PAD > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE STEERING WHEEL COVER LOWER NO.3 |
![]() |
Using a thin-bladed screwdriver, remove steering wheel cover lower No.3.
| 4. REMOVE STEERING WHEEL COVER LOWER NO.2 |
![]() |
Using a thin-bladed screwdriver, remove steering wheel cover lower No.2.
| 5. REMOVE STEERING PAD |
![]() |
Using "Torx" socket wrench (T30), loosen the 2 "Torx" screws until the groove along the screw circumference catches on the screw case.
![]() |
Pull the steering pad out of the steering wheel assembly and support the steering pad with one hand as shown in the illustration.
Disconnect the horn connector.
Disconnect the 2 connectors from the steering pad.
Remove the steering pad.