Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › REAR AIRBAG SENSOR

REAR AIRBAG SENSOR > REMOVAL

for Preparation Click here


HINT:
The procedure described below is for the LH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.



1. PRECAUTION

CAUTION:
Read "PRECAUTION" thoroughly before servicing (Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.



3. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY LH


    B130720
  1. Pull the rear seatback lock release button and tilt the rear seatback forward.

  1. Disengage the 8 clips and remove the rear seatback board carpet.



4. REMOVE REAR SEATBACK ASSEMBLY LH


    B130721
  1. Remove the rear center seat inner belt from the rear seatback holder.

  1. Remove the 2 bolts.

  1. Disengage the hook and remove the rear seatback.



5. REMOVE REAR FLOOR BOARD


    B135073E04
  1. Remove the bolt and the luggage hold belt striker.
    Text in Illustration 
    *a
    for RH Side
    *b
    for LH Side

    HINT:
    Use the same procedure for both sides.



    B135075
  1. Disengage the clip and the claw and remove the rear floor board.



6. REMOVE REAR FLOOR MAT SUPPORT PLATE


    B130592
  1. Remove the 5 screws.



    B130593
  1. Disengage the 11 claws and remove the rear floor mat support plate.



7. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY


B179163E03

HINT:
Use the same procedure for both sides.

Text in Illustration 
*a
for RH Side
*b
for LH Side
  1. Remove the cap.

  1. Remove the bolt and the luggage hold belt striker.



8. REMOVE REAR FLOOR MAT ASSEMBLY


    B130594
  1. Using a clip remover, remove the 2 clips and the rear floor mat.



9. REMOVE FRONT DOOR SCUFF PLATE LH


    B130597
  1. Disengage the 14 claws and remove the front door scuff plate.



10. REMOVE ACCESS DOOR SCUFF PLATE LH


    B130598
  1. Disengage the 6 claws and remove the access door scuff plate.



11. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH
  1. Remove the front door opening trim weatherstrip LH to the extent necessary to remove the deck trim side panel assembly LH .



12. REMOVE DECK SIDE GARNISH (w/ Woofer) (for RH Side)


    B271490
  1. Disengage the 6 claws and remove the rear deck side garnish.



13. REMOVE SPEAKER MOUNTING COVER (w/ Woofer) (for RH Side)


    E220885
  1. Disengage the 8 clips and 2 guides and remove the speaker mounting cover.



14. REMOVE AMPLIFIER BOX SPEAKER ASSEMBLY (w/ Woofer) (for RH Side)


    E220886
  1. Disconnect the connectors.

  1. Remove the 4 bolts and the amplifier box speaker.



15. REMOVE PACKAGE HOLDER NET HOOK


B271495E01

HINT:
Use the same procedure to remove all the package holder net hooks.

Text in Illustration 
*a
for RH Side without Woofer
*b
for LH Side
  1. Remove the screw and the package holder net hook.



16. REMOVE QUARTER TRIM POCKET TRAY (w/o Woofer) (for RH Side)


    B130611
  1. Disengage the 7 claws and remove the quarter trim pocket tray.



17. REMOVE SIDE TRIM COVER (w/o Woofer) (for RH Side)


    B267111
  1. Disengage the 6 claws and the 2 guides remove the side trim cover.



18. REMOVE QUARTER TRIM POCKET (w/o Woofer) (for RH Side)


    B130613
  1. Disengage the 6 claws and remove the quarter trim pocket.



19. REMOVE LAP BELT OUTER ANCHOR COVER


    B138385
  1. Disengage the 3 claws and remove the lap belt outer anchor cover.



20. REMOVE REAR SEAT OUTER BELT ASSEMBLY LH


    B130781
  1. Remove the bolt and the through anchor.



    B130780
  1. Remove the 2 bolts, 2 hooks and the retractor.



21. REMOVE REAR DECK TRIM COVER (w/ Power Outlet Socket)


    B135130
  1. Disengage the 8 claws and remove the rear deck trim cover.



    B138600
  1. Disconnect the power outlet connector.



22. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH


    B130618
  1. Remove the 3 screws.



    B130619
  1. Disengage the 6 clips and the 8 claws and remove the deck trim side panel.



23. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side)


    B130616
  1. Remove the 3 screws and bolt.



    B130617
  1. Disengage the 6 clips and the 8 claws and remove the deck trim side panel.



24. REMOVE REAR AIRBAG SENSOR LH


    C128266
  1. Remove the nut and the rear airbag sensor LH.



    C128267E01
  1. Disconnect the connector from the rear airbag sensor LH.