CENTER AIRBAG SENSOR ASSEMBLY > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE INSTRUMENT PANEL GARNISH LH |
![]() |
Remove screw <H>.
Disengage the 3 clips and remove the instrument panel garnish.
| 4. REMOVE INSTRUMENT PANEL GARNISH RH |
![]() |
Remove screw <H>.
Disengage the 3 clips and remove the instrument panel garnish.
| 5. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY |
![]() |
Remove the 2 <H> screws.
Disengage the 4 clips and remove the integration control panel assembly.
Disconnect the 3 connectors.
| 6. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) |
![]() |
Remove the shift lever knob.
| 7. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD) |
![]() |
Remove the shift lever knob.
| 8. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY |
![]() |
Disengage the 2 A claws and 2 B claws.
Slide the parking brake hole cover toward the front of the vehicle, disengage the 2 C claws and remove the parking brake hole cover.
| 9. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY |
![]() |
Shift the shift lever into the N position.
Disengage the 5 clips and 3 claws and remove the console upper rear panel.
| 10. REMOVE BOX BOTTOM MAT |
![]() |
Remove the box bottom mat.
| 11. REMOVE FRONT CONSOLE BOX |
![]() |
Remove the 4 <D> bolts.
Disengage the 5 claws and remove the console box.
| 12. REMOVE CONSOLE UPPER PANEL NO.1 GARNISH |
![]() |
Disengage claw A and the clip.
Slide the console upper panel garnish toward the rear of the vehicle, disengage the claw B and remove the console upper panel garnish.
| 13. REMOVE INSTRUMENT LOWER COVER SUB-ASSEMBLY |
![]() |
Remove the 2 clips and 2 <F> bolts.
Disengage the 3 clips and 2 claws and remove the instrument lower cover.
| 14. REMOVE CENTER AIRBAG SENSOR ASSEMBLY |
![]() |
Disconnect the holder (with connectors) from the center airbag sensor assembly.
![]() |
Remove 3 bolts and the center airbag sensor assembly.