Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › BLOWER UNIT

BLOWER UNIT > DISASSEMBLY

for Preparation Click here



1. REMOVE AIR INLET CONTROL SERVO MOTOR


I102467
  1. Remove the 2 screws and remove the air inlet control servo motor.



2. REMOVE BLOWER MOTOR


I102519
  1. Remove the 3 screws and the blower motor.



3. REMOVE BLOWER RESISTOR


I102614
  1. Remove the 2 screws and the blower resistor.



4. REMOVE CLEAN AIR FILTER SUB-ASSEMBLY


I102464
  1. Disengage the 2 claws and remove the air filter.



5. REMOVE AIR REFINER ELEMENT


I102466
  1. Remove the air refiner element.