Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › BLOWER UNIT

BLOWER UNIT > REASSEMBLY

for Preparation Click here



1. INSTALL AIR REFINER ELEMENT


I102466
  1. Install the air refiner element.



2. INSTALL CLEAN AIR FILTER SUB-ASSEMBLY


I102465
  1. Engage the 2 claws and install the air filter.

    NOTICE:
    Install the air filter with its UP mark oriented in the correct direction.



3. INSTALL BLOWER RESISTOR


I102614
  1. Install the blower resistor with the 2 screws.



4. INSTALL BLOWER MOTOR


I102519
  1. Install the blower motor with the 3 screws.



5. INSTALL AIR INLET CONTROL SERVO MOTOR


I102467
  1. Install the air inlet control servo motor with the 2 screws.