WIRELESS DOOR LOCK CONTROL SYSTEM > SYSTEM DESCRIPTION |
| WIRELESS DOOR CONTROL SYSTEM DESCRIPTION |
This system locks and unlocks the vehicle's doors remotely. The wireless control system has the following features:
| FUNCTION OF MAIN COMPONENTS |
| Components | Functions |
| Door control transmitter |
|
| Door control receiver | Receives weak electric waves (recognition codes and function codes) from door control transmitter, and changes waves to code data |
| Door lock position switch | Transmits door lock conditions of each door to main body ECU |
| Unlock warning switch assembly | Detects if key is in ignition key cylinder |
| Front door courtesy switch assembly Rear door courtesy switch assembly Back door courtesy switch assembly Back window courtesy switch assembly | Turns ON when door is open and turns OFF when door is closed. Outputs door status (open or closed) to main body ECU. |
| SYSTEM FUNCTION |
Door lock / unlock function:
Answer-back function:
The wireless door lock control system has the following functions.
| Function | Outline |
| All door lock function | Pressing LOCK switch locks all doors |
| All door unlock function | Pressing UNLOCK switch 2 times unlocks all doors |
| Answer-back function | Hazard warning lights flash once and wireless door lock buzzer sounds once when doors are locked, and hazard warning lights flash twice and wireless door lock buzzer sounds twice when doors are unlocked to indicate that operation has been completed |
| Automatic locking function | If no doors are opened within 60 seconds of being unlocked by wireless transmitter, all doors are locked again automatically |
| Illuminated entry function | If locked doors are unlocked through wireless operation, dome light illuminates. If one of following situations occurs, lights fade out:
|
| Panic alarm function | Pressing PANIC switch for more than 1 second sounds horn |
| Security function | Sends signal as rolling code |
| Transmitter recognition code registration function | Enables 4 modes for registering (writing and storing) transmitter recognition codes in EEPROM, built into door control receiver |