WIRELESS DOOR LOCK CONTROL SYSTEM > CUSTOMIZE PARAMETERS |
| CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE) |
Connect a Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the tester ON.
Enter the following menus: Body Electrical / Main Body / Utility / Customize.
Select the setting by referring to the table below.
| Display | Default | Contents | Setting |
| Open Door Warning | ON | If a door is not completely closed and LOCK is pressed, this function sounds a buzzer for 5 seconds | ON / OFF |
| Hazard Answer Back | ON | When wireless lock switch on transmitter pressed, illuminates all hazard warning lights once. When unlock switch pressed, all hazard warning lights illuminate twice | ON / OFF |
| Wireless Buzzer Vol | MAX | To adjust the volume of the wireless buzzer | OFF / MIN / MID1/ MID2 /MID3 / MAX |
| Wireless Control | ON | ON /OFF of wireless door lock function | ON / OFF |
| Panic Function | ON | Operates security alarm when panic switch on transmitter continuously pressed for 1 second | ON / OFF |
| Unlock 2 Operation | ON | Function that unlocks driver side door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock. | ON / OFF |
| Auto Lock Time | 60 seconds | Time until relocking after unlocking with wireless door lock function | 60 seconds / 30 seconds |
| Wireless Auto Lock | ON | Function of automatically looking doors after unlocking doors with wireless key. | ON/OFF |