Home › RESTRAINTS › SEAT BELT › SEAT BELT WARNING SYSTEM

SEAT BELT WARNING SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here



CUSTOMIZE SEAT BELT WARNING SYSTEM

HINT:
The following items can be customized.

CAUTION:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Record the current settings before customizing.

  1. Customizing with the Techstream.

    1. Connect the Techstream to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the Techstream on.

    4. Enter the following menus: Utility / Customize / Warning.

    5. Select the setting by referring to the table below.

      Warning 
      Display
      Default
      Content
      Setting
      Driver Side Seatbelt Warning Buzzer
      ON
      If the driver side seat belt is unfastened and the vehicle is driven at approximately 20 km/h (12.4 mph) or more, the system sounds the seat belt warning buzzer.
      ON / OFF
      Front Passenger Side Seatbelt Warning Buzzer
      ON
      If the front passenger side seat belt is unfastened with the front passenger seat occupied and the vehicle is driven at approximately 20 km/h (12.4 mph) or more, the system sounds the seat belt warning buzzer.
      ON / OFF