Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › AIR CONDITIONING PANEL

AIR CONDITIONING PANEL > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE INSTRUMENT PANEL GARNISH LH


    B133886
  1. Remove screw <H>.

  1. Disengage the 3 clips and remove the instrument panel garnish.

    NOTICE:
    1. Pull the instrument panel garnish up at an angle of 45° to remove it.
    2. Do not damage the surface of the instrument panel when removing it.



3. REMOVE INSTRUMENT PANEL GARNISH RH


    B133887
  1. Remove screw <H>.

  1. Disengage the 3 clips and remove the instrument panel garnish.

    NOTICE:
    1. Pull the instrument panel garnish up at an angle of 45° to remove it.
    2. Do not damage the surface of the instrument panel when removing it.



4. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY


B133888
  1. Remove the 2 screws.

  1. Disengage the 4 clips and remove the integration control assembly.

  1. Disconnect the 3 connectors.