Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › AIR CONDITIONING PANEL

AIR CONDITIONING PANEL > REASSEMBLY

for Preparation Click here



1. INSTALL CONTROL KNOB SUB-ASSEMBLY


  1. Engage the guides and install the control knobs sub-assemblies in the order shown in the illustration.


    I109180E01



2. INSTALL AIR CONDITIONER AMPLIFIER ASSEMBLY


I102506
  1. Remove the air conditioner amplifier assembly.

  1. Engage the lock of the connector and connect the cable.



    I104035
  1. Engage the 2 claws and install the rear panel.

  1. Install the 3 screws.