COMPRESSOR > INSPECTION |
| 1. INSPECT MAGNET CLUTCH ASSEMBLY |
![]() |
Check the magnet clutch operation.
Confirm that the magnet clutch hub and magnet clutch rotor lock when the battery positive lead is connected to terminal 3 (MG+) of the magnet clutch, and the negative lead is connected to the ground wire.
| *1 | Magnet Clutch Hub |
| *2 | Magnet Clutch Rotor |
| *3 | Battery |
| *a | Components without harness connected: (Magnet clutch) |
Measure the resistance.
Measure the resistance between terminals 1 and 2.