Home
›
HEATER & AIR CONDITIONING SYSTEM
›
AIR CONDITIONING
›
FRONT BLOWER RESISTOR
FRONT BLOWER RESISTOR > INSPECTION
for Preparation
Click here
1. INSPECT BLOWER RESISTOR
Measure the resistance.
Standard resistance:
Tester connection
Specified condition
1 - 2
0.83 to 0.95 Ω
1 - 3
0.31 to 0.35 Ω
1 - 4
1.76 to 2.02 Ω
If the resistance value is not as specified, replace the blower resistor.