Home › SUSPENSION & AXLE › SUSPENSION › FRONT UPPER SUSPENSION ARM

FRONT UPPER SUSPENSION ARM > DISASSEMBLY

for Preparation Click here



1. REMOVE FRONT SUSPENSION UPPER ARM BUSH


G020154
  1. Using a hammer and chisel, raise the flange of the bushing diagonally as shown in the illustration.



    G020155E01
  1. Using SST and a press, remove the upper arm bush (front side).

    SST
    09613-26010  
    09710-22021   (09710-01031)
    09950-00020  

  1. The removal procedure for the rear side is the same as that for the front side.